Assistenza clienti
+49 (0) 6501 9695 - 2000
sales@partseurope.eu

Kit impianto di lubrificazione ad alte prestazioni per M-Eight

FEULING OIL PUMP CORP.
6A9E6747-B483-4B4F-995D-478C384D1311.png
Twitter, Facebook, Instagram o simili. Se carichi questi contenuti, i dati personali saranno trasferiti a questa piattaforma ed eventualmente a terze parti.

Per maggiori informazioni, consulta la nostra politica sulla Privacy e i Cookie.

  • Includes Fueling’s® High Flow billet camplate made from 7075 aluminum which is 50% harder and stronger than the factory or Feuling OE+ camplates
  • Increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including matching the oil portholes throughout the camplate to the portholes in the engine case which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings
  • Feuling oil pumps are bench tested, the relief valve is seated and sealed to a minimum of 30 psi with full pop off at 55-60 psi
  • Increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function
  • Fueling® oil pump and camplate combination eliminate common pressure and scavenge issues associated with the factory oiling systems
  • Feuling M-Eight oil pumps have the groove machined on the back cover to accept the factory crank bearing seal
  • Quieter and smoother engine operation
  • Increase oil pressure, scavenge volume and engine oil flow
  • 42% more scavenge volume with port sizing, matched passages and holes to the engine case
  • 68% more oil volume to the crankshaft and connecting rod bearing
  • Engine temperatures run 15°-25° cooler
  • Oil temperatures run 15°-30° cooler
  • 10-30 more PSI of oil pressure
  • M-Eight Twin-Cooled™ motor oil pump has 30% more pressure gear volume over stock and 53% more scavenge gear volume over stock
  • M-Eight Oil-Cooled motor pump has 27% more pressure and scavenge gear volume over stock
  • Eliminate wet sumping, blow by and oily air cleaners
  • Test results show 2 horsepower gain and 2 ft./lb. of torque gain to the rear wheel on M-Eight
  • Includes a Race Series® oil pump, Race Series® full-travel or short- travel hydraulic roller lifters, High Flow camplate and cam installation kit, cam bearing, cam/​crank bolts and washers, engine and fastener assembly lube
  • Billet 7075 aluminum oil pump is 50% harder and stronger than the factory pump; holds tighter tolerances under temperature
  • Race Series® oil pumps feature increased scavenge side kidney port volume over HP+ oil pumps
  • Race Series® full-travel hydraulic lifters have a full .200” of total travel designed with a slower bleed down rate to handle heavy valve spring pressures, increase engine rpm before valve float and feature increased roller clearance for steep ramped camshafts and clearance for the M-Eight front exhaust camshaft lobe flange
  • Race Series® short-travel hydraulic lifters have .115” of total travel and will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engine
  • The travel reduction reduces the amount of oil that is required to fill the inside of the lifter which reduces oil aeration inside the lifter on steep, fast action high lift camshaft lobes
  • Made in the USA
  • Optional Fueling X ARP bolt kit available for the high flow camplate PART #0932-0192 and HP+ or RS oil pump combo. See PART #2401-0993, optional ARP oil pump bolts do not use washers.
  • Feuling test results show as much as 50% reduction of engine sump oil level.
  • M-Eight engines must check clearance on front exhaust lifter to camshaft flange fit.
  • Block-off plate PART #0932-0036 required when using gear drive cams.
Marchio
FEULING OIL PUMP CORP.
Codice articolo produttore
7097
Colore/finitura
Rosso
Denominazione prodotto
Kit pompa
Materiale
Alluminio
Modello
Race Series®
Stile
Trasmissione a catena, Trasmissione a ingranaggi
Tipo
Sistema di lubrificazione
Unità
Kit

FEULING OIL PUMP CORP.

OIL SYSTEM RS 17-19 M8

09320199 / 7097

1.786,19EUR*
*IVA al 19% inclusa
9+ In magazzino
Aggiungi alla lista dei desideri

Prodotti simili

FEULING OIL PUMP CORP.
product thumbnail
1
0 In magazzino
HP+® Oil System Packs for M8
1.348,27EUR*
*IVA al 19% inclusa
FEULING OIL PUMP CORP.
product thumbnail
1
7 In magazzino
Pompa olio Race Series®
682,73EUR*
*IVA al 19% inclusa
FEULING OIL PUMP CORP.
product thumbnail
1
1 In magazzino
Pompe olio ad alto volume e ad alta pressione per M-Eight
569,40EUR*
*IVA al 19% inclusa
FEULING OIL PUMP CORP.
product thumbnail
1
9+ In magazzino
Piastre di supporto camme OE+ per Milwaukee Eight
444,16EUR*
*IVA al 19% inclusa
FEULING OIL PUMP CORP.
product thumbnail
1
8 In magazzino
Punterie idrauliche Race Series®
428,47EUR*
*IVA al 19% inclusa
FEULING OIL PUMP CORP.
product thumbnail
1
4 In magazzino
Kit carter camme
938,35EUR*
*IVA al 19% inclusa
FEULING OIL PUMP CORP.
product thumbnail
1
1 In magazzino
Pompa olio ad alto volume HP+®
1.058,22EUR*
*IVA al 19% inclusa
FEULING OIL PUMP CORP.
product thumbnail
1
9 In magazzino
Supporto per motore Milwaukee Eight
184,14EUR* 211,36EUR*
13%
*IVA al 19% inclusa
FEULING OIL PUMP CORP.
product thumbnail
1
6 In magazzino
Punterie a corsa corta Race Series®
408,42EUR*
*IVA al 19% inclusa
FEULING OIL PUMP CORP.
product thumbnail
1
5 In magazzino
Punterie idrauliche Race Series®
439,18EUR*
*IVA al 19% inclusa

Informazioni sul prodotto


I prezzi mostrati sono quelli al pubblico da noi consigliati inclusa IVA locale.

Il prezzo offerto dai nostri rivenditori potrebbe variare a causa di costi aggiuntivi quali il trasporto, la dogana o l’IVA locale.

Contatta il tuo rivenditore Parts Europe per una stima precisa o utilizza la ricerca rivenditore per trovare quello più vicino a te.